|  | 
| MSI K8T NEO-FIS2R Socket 754/Athlon 64/SATA/R/A/GBE/1394/ATX
MSI K8TNEO-FIS2R VIA K8T800 Socket 754 K8 Athlon64 3DDR 400 Serial ATA w/Audio/Lan/iEEE1394 ATX MB - Retail Box
Product Description :
CPU
- Supports 64-bit AMD? Athlon64 processor (Socket 754)
Chipset
- VIA? K8T800 Chipset
- HyperTransport connection to AMD Next Generation of CPU
- 8 or 16 bit control/ address. data transfer both directions
- 800/600/400/200MHz "Double Data Rate" operation both direction
- AGP v3.0 compliant with 8X transfer mode
- VIA? VT8237 Chipset
- Ultra DMA 66/100/133 master mode EIDE controller
- Integrated dual channel native Serial ATA/RAID controller that will supply 150MB/s and support RAID 0, RAID 1
- ACPI & PC2001 compliant enhanced power management
- Supports 8 USB2.0 ports. (Rear x4/ Front x4)
Main Memory
- Supports three 184-pin DDR SDRAMs up to 2GB memory size
- Supports DDR400* /DDR333/DDR266 DDR SDRAM?( *Refer to MSI recommended modules )
Note: PC3200 (DDR400) maximum 4 banks (2 double-sided) only
Due to the High Performance Memory design, motherboards or system configurations may or may not operate smoothly at the JEDEC (Joint Electron Device Engineering Council) standard settings (BIOS Default on the motherboard) such as DDR voltage, memory speeds and memory timing. Please confirm and adjust your memory setting in the BIOS accordingly for better system stability.
Example: Kingston HyperX DDR500 PC4000 operates at 2.65V, 3-4-4-8, CL=3.
For more information about specification of high performance memory modules, please check with your Memory Manufactures for more details.
SLOTS
- One AGP (Accelerated Graphics Port) 1.5V 4x/8x slot
- Five PCI 2.2 32-bit Master PCI Bus slots. (support 3.3v / 5v PCI bus interface)
BIOS
- The mainboard BIOS provides "Plug & Play" BIOS which detects the peripheral devices and expansion cards of the board automatically.
- The mainboard provides a Desktop Management Interface (DMI) function which records your mainboard specifications.
On-Board IDE
- An IDE controller on the VT8237 chipset provides IDE HDD/CD-ROM with PIO, Bus Master and Ultra DMA 66/100/133 operation modes. It can connect 4 Ultra ATA drives.
- Serial ATA/150 controller integrated in VT8237
- Up to 150MB/s transfer speed
- Can connect up to 2 Serial ATA drives
- Support RAID 0, RAID 1
Promise 20378 Onboard
- Supports ultra ATA, Serial ATA, Ultra ATA RAID 0 or 1, Serial ATA RAID 0 or 1, Ultra/ Serial ATA RAID 0+1
- Connect up to 2 Serial ATA devices and 2 Ultra ATA 133 devices
IEEE1394
- VIA VT6307 IEEE1394 controller
- Provides onboard one 6-pins port and one 4-pins port
- Transfer rate up to 400Mbps
Audio
- 6 Channel software audio codec Realtek ALC655
- Compliance with AC97' v2.3 Spec
- Meet PC2001 audio performance requirement
- Provide onboard SPDIF out
Network
- Realtek 8110S Dual layout
- Integrated Gigabit Ethernet MAC and PHY transceiver, auto-negotiation operation.
- Supports single-port 10MB/s, 100MB/s, 1000MB/s Base-T application.
- Compliance with PCIv2.2 and LAN on Motherboard (LOM) standard.
On-Board Peripherals
- 1 floppy port supports 2 FDDs with 360K, 720K, 1.2M, 1.44M and 2.88Mbytes
- 1 serial ports COM1
- 1 parallel port supports SPP/EPP/ECP mode
- 8 USB 2.0 ports (Rear x 4 / Front x 4)
- 5 audio ports in vertical (Left, Center, Right, Line-in, MIC)
- 1 SPDIF out
- 2 IEEE 1394 connectors
- 1 RJ-45 jack
- 1 IrDA connector for SIR/ASKIR/HPSIR
Dimension
- 30.5 cm(L) x 24.5 cm(W) ATX Form Factor
|
|
| | |
